Delcam News

Delcam opens North-West office to increase sales

Thu, 23 May 2013 00:00:00 GMT

Delcam has opened an office in Liverpool to support increased sales in the North-West of the UK, especially to the region�s aerospace industry.

Delcam France to host free seminar on machining with robots with KUKA

Thu, 23 May 2013 00:00:00 GMT

Delcam France will hold a free seminar on machining with robots in association with robot manufacturer KUKA at the KUKA site at Villebon-sur-Yvette, near Paris, on 7th June.

Delcam to show electrode solution at Intermold Thailand

Wed, 22 May 2013 00:00:00 GMT

Delcam Thailand will demonstrate Delcam�s completely integrated solution for the design, machining and inspection of electrodes at the Intermold Thailand exhibition to be held in Bangkok from 20th to 23rd June.

Delcam to show latest CAM programming software in Moscow

Tue, 21 May 2013 00:00:00 GMT

Delcam will demonstrate the latest developments in its complete range of CAM software at the Metalloobrabotka exhibition to be held in Moscow from 27th to 31st May.

Delcam to show latest machining and inspection software at PTC Live

Mon, 20 May 2013 00:00:00 GMT

Delcam will demonstrate the latest developments in its machining and inspection software at the PTC Live Global event to be held in Anaheim, California, from 9th to 12th June.

Delcam's PowerMILL CAM gives Rimstock speed, quality and flexibility

Thu, 16 May 2013 00:00:00 GMT

Using Delcam�s PowerMILL CAM software has helped wheel manufacturer, Rimstock, boost its production to over 350,000 wheels per year, while maintaining the company�s reputation for high quality and rapid delivery times.

Delcam India organises update meeting for PowerMILL users in Pune

Wed, 15 May 2013 00:00:00 GMT

Delcam India recently held its latest update training session for customers in Pune using the PowerMILL CAM software for high-speed and five-axis machining.

Delcam webinar on efficient electrode manufacture

Wed, 15 May 2013 00:00:00 GMT

Delcam will host two webinars on the efficient design and manufacture of electrodes on 23rd May.

Delcam's PowerINSPECT 2013 offers dual-device inspection

Tue, 14 May 2013 00:00:00 GMT

The 2013 release of Delcam�s PowerINSPECT inspection software offers unique dual-device inspection options that allow measurement with two portable devices at the same time.

Delcam's latest technology to be shown by SEACAM at Feira Feimafe 2013

Fri, 10 May 2013 00:00:00 GMT

The latest CADCAM technology from Delcam will be demonstrated on stand B49 at the Feira Feimafe by SEACAM, Delcam�s longstanding reseller in Brazil.

Delcam Indonesia to show latest CAM developments at MTT Expo

Thu, 9 May 2013 00:00:00 GMT

Delcam Indonesia will demonstrate the latest developments in Delcam�s complete range of CAM software at the MTT Indonesia Expo to be held in Jakarta from 22nd to 25th May.

Delcam expands North American support team

Wed, 8 May 2013 00:00:00 GMT

Delcam is pleased to announce a further expansion of its North American support resources with the addition of Cory Medina to the post-sales support team in Salt Lake City.

Delcam graduate mentors Young Enterprise project at Small Heath School

Wed, 8 May 2013 00:00:00 GMT

Throughout the current academic year, Delcam has supported a group of students from Small Heath School close to its Birmingham headquarters as part of the Young Enterprise Company Programme.

Delcam's PowerINSPECT on multiple devices at Control

Tue, 7 May 2013 00:00:00 GMT

Delcam�s PowerINSPECT inspection software will be demonstrated on a range of devices, including portable arms, a laser tracker and a machine tool, on stand 3514 in Hall 3 at the Control exhibition to be held from 14th to17th May in Stuttgart.

Delcam hosts successful COMET robot machining seminar

Fri, 3 May 2013 00:00:00 GMT

As part of its dissemination activities, the COMET project is hosting four technical seminars throughout Europe describing recent progress in its work on machining with robots.

Delcam to focus on five-axis developments at Advanced Manufacturing

Thu, 2 May 2013 00:00:00 GMT

Delcam will highlight its latest developments for the programming of five-axis machines at Advanced Manufacturing event to be held at the NEC, Birmingham, from 4th to 6th June.

Europe's largest mouldmaker specifies Delcam software for tooling manufacture

Tue, 30 Apr 2013 00:00:00 GMT

The Simoldes Group, Europe�s largest mouldmaking company, has standardised on Delcam�s PowerSHAPE CAD software and PowerMILL CAM for the manufacture of its tooling.

Delcam Malaysia to show latest CAM developments at METALTECH

Tue, 30 Apr 2013 00:00:00 GMT

Delcam Malaysia will demonstrate the latest developments in Delcam�s complete range of CAM software at the METALTECH exhibition to be held in Kuala Lumpur from 21st to 25th May.

Delcam to show electrode solution at Amerimold

Mon, 29 Apr 2013 00:00:00 GMT

Delcam will demonstrate its completely integrated solution for the design, machining and inspection of electrodes at the Amerimold exhibition to be held in Rosemont, Illinois, on 12th and 13th June.

Delcam's aerospace software and services on show at Paris Air Show

Fri, 26 Apr 2013 00:00:00 GMT

Delcam will promote its wide range of software and services for the aerospace manufacturing and MRO industries on the Midlands Aerospace Alliance stand at the Paris Air Show to be held from 17th to 23rd June.

Delcam Australia to show latest CAM developments at AUSTEC

Fri, 26 Apr 2013 00:00:00 GMT

Delcam Australia will demonstrate the latest developments in Delcam�s complete range of CAM software at the TIMTOS exhibition to be held in Melbourne from 7th to 10th May.

Delcam launches PowerMILL Robot Interface

Wed, 24 Apr 2013 00:00:00 GMT

Delcam has launched the PowerMILL Robot Interface for the programming of robots for multi-axis machining operations.

Delcam to show robot machining at Natural Stone Show

Thu, 11 Apr 2013 00:00:00 GMT

Delcam will demonstrate the latest advances in the use of robots for machining at the Natural Stone Show to be held at the ExCel, London, from 30th April to 2nd May.

Delcam to launch new PowerINSPECT in China at CIMT seminar

Thu, 11 Apr 2013 00:00:00 GMT

Delcam will launch the 2013 version of its PowerINSPECT inspection software in China with a free half-day seminar on 25th April during the CIMT exhibition in Beijing.

Delcam helps American Mold Builders Association to 'Push the Boundaries'

Wed, 10 Apr 2013 00:00:00 GMT

Delcam will support the 'Push the Boundaries' theme adopted for the 2013 AMBA Convention, to be held from April 24th to 26th at the Renaissance Hotel and Convention Center, Schaumburg, Illinois.

Delcam PowerMILL used for turbo milling demonstrations at Hermle Open House

Tue, 9 Apr 2013 00:00:00 GMT

Delcam�s PowerMILL software for five-axis machining is being used to program a novel machining method for the creation of "fir-tree� profiles in components for turbo machinery.

Delcam joins Coventry Manufacturing Technology Centre

Mon, 8 Apr 2013 00:00:00 GMT

Birmingham-based CADCAM software developer Delcam has become a member of the flagship Manufacturing Technology Centre (MTC) in Coventry.

Delcam to show PowerSHAPE solid modelling and point cloud tools at Develop3D Live

Mon, 8 Apr 2013 00:00:00 GMT

Delcam will demonstrate the 2013 R2 version of its PowerSHAPE CAD software family at the Develop3D Live 2013 conference at Warwick University on 16th April.

Delcam's Vortex high-speed roughing headed for China

Wed, 3 Apr 2013 00:00:00 GMT

Delcam will demonstrate its new Vortex strategy for high-speed area clearance at the CIMT exhibition in Beijing from 22nd to 27th April.

Delcam Japan to show electrode solution at Intermold

Thu, 28 Mar 2013 00:00:00 GMT

Delcam Japan will demonstrate Delcam�s completely integrated solution for the design, machining and inspection of electrodes at the Intermold exhibition to be held in Tokyo from 17th to 20th April.

Delcam announces record sales and profits in 2012

Tue, 26 Mar 2013 00:00:00 GMT

Birmingham-based CADCAM developer Delcam has announced that the company achieved record annual sales of �47.

Delcam to launch PowerINSPECT 2013 with free seminar

Mon, 25 Mar 2013 00:00:00 GMT

Delcam will launch the 2013 version of its PowerINSPECT inspection software with a free half-day seminar at its Birmingham headquarters on 23rd April.

Delcam PowerSHAPE new solid modelling and point cloud tools at RAPID

Fri, 22 Mar 2013 00:00:00 GMT

Delcam will demonstrate new tools and enhancements for solid modelling and for manipulating point clouds in its PowerSHAPE CAD software family at the SME�s RAPID exhibition to be held in Pittsburgh from 10th to 13th June.

Delcam to highlight five-axis developments at EASTEC

Wed, 20 Mar 2013 00:00:00 GMT

Delcam will highlight its latest developments for the programming of five-axis machines at EASTEC 2013 to be held in West Springfield, Massachusetts from 14th to 16th May.

Delcam to feature robot machining and portable inspection at Industrie

Mon, 18 Mar 2013 00:00:00 GMT

Delcam France will highlight the latest developments in machining with robots and in portable inspection at the Industrie exhibition to be held in Lyon, France, from 16th to 19th April.

Korean student wins first Delcam international CAM competition

Fri, 15 Mar 2013 00:00:00 GMT

Jang-U Shim, from Chonbuk Mechanical & Technical High School in Korea, was the winner of Delcam�s first international student CAM competition, which was held at the company�s Birmingham headquarters earlier this year.

Delcam supports Ontario machine-tool suppliers at Joint Open House

Thu, 14 Mar 2013 00:00:00 GMT

Delcam will support the leading machine-tool distributors in Ontario � DMG Canada, Elliott Matsuura, Ferro Technique, SST and EMEC � at their annual Joint Open House event in the Greater Toronto area on 24th and 25th April.

Delcam Thailand holds On-Machine Verification event with Mazak and Renishaw

Wed, 13 Mar 2013 00:00:00 GMT

Delcam Thailand held a successful two-day event promoting On-Machine Verification (OMV) to local Bangkok manufacturers on 7th and 8th March.

Delcam to sponsor ISTMA international toolmaking conference

Tue, 12 Mar 2013 00:00:00 GMT

Delcam is to sponsor the opening dinner of the 14th World Conference of the International Special Tooling & Machining Association (ISTMA) at the Tortworth Court Hotel, Wotton-under-Edge.

Delcam launches new joint venture in Mexico during Ministerial visit

Mon, 11 Mar 2013 00:00:00 GMT

Delcam has formed a new joint venture in Mexico, Delcam Mexico, to promote faster growth in sales of the company�s CADCAM software in the country.

Delcam's latest CAM developments on show in Singapore

Thu, 7 Mar 2013 00:00:00 GMT

Delcam will demonstrate the latest developments in its complete range of CAM software in partnership with Shonan Design at the MTA Singapore exhibition to be held from 9th to 12th April.

Delcam CADCAM software chosen to drive monster 5-axis machining centre

Mon, 4 Mar 2013 00:00:00 GMT

Delcam�s PowerSHAPE design software and PowerMILL CAM system have been chosen by MonsterCAM to drive one of the UK�s largest independently-owned, continuous five-axis machining centres.

Delcam Taiwan plans demos with 22 partners at TIMTOS

Mon, 4 Mar 2013 00:00:00 GMT

Programs produced by Delcam Taiwan with Delcam�s CAM software will be demonstrated on 22 machine tool partner stands at the TIMTOS exhibition to be held in Taipei, Taiwan, from 5th to 10th March, with many of the partners showing a variety of parts machined with more than one of the Delcam systems.

Delcam demonstrates robot machining to Nick Clegg and Vince Cable

Fri, 1 Mar 2013 00:00:00 GMT

Delcam demonstrated the latest developments in its PowerMILL software for the programming of machining by robots at the Manufacturing Summit held by the UK Department for Business, Innovation and Skills at the Heritage Motor Centre in Gaydon on 28th February.

Delcam to launch dual-device inspection software at Control

Tue, 26 Feb 2013 00:00:00 GMT

Delcam will launch the 2013 release of its PowerINSPECT inspection software on stand 3514 at the Control exhibition to be held in Stuttgart, Germany, from 14th to 17th May.

Hankook Delcam to have biggest CAM booth at Intermold Korea

Thu, 21 Feb 2013 00:00:00 GMT

Delcam�s Joint Venture Partner in Korea, Hankook Delcam, will reinforce its position as the leading supplier of CAM software in the country on its largest-ever booth at the Intermold Korea exhibition to be held in Ilsan from 12th to 16th March.

Delcam to host robot machining seminar to demonstrate COMET project success

Mon, 18 Feb 2013 00:00:00 GMT

COMET project partners will be hosting free seminars on machining with robots throughout Europe to communicate their results and findings, and also to demonstrate Delcam�s newly developed PowerMILL Robot Interface software.

Delcam Italia to show electrode solution at EuroStampi

Fri, 15 Feb 2013 00:00:00 GMT

Delcam Italia will demonstrate Delcam�s completely integrated solution for the design, machining and inspection of electrodes at the EuroStampi exhibition to be held in Parma from 21st to 23rd March as part of the MECSPE group of exhibitions.

Delcam Taiwan to show latest CAM developments at TIMTOS

Thu, 14 Feb 2013 00:00:00 GMT

Delcam Taiwan will demonstrate the latest developments in Delcam�s complete range of CAM software at the TIMTOS exhibition to be held in Taipei from 5th to 10th March.

Delcam Australia moves to new offices

Tue, 12 Feb 2013 00:00:00 GMT

Delcam Australia, the local subsidiary of leading CADCAM developer, Delcam, celebrated its move to new offices in Melbourne with a grand opening attended by Delcam Chairman, Peter Miles, on 7th February.

Delcam Polska opens third office in Bydgoszcz

Fri, 8 Feb 2013 00:00:00 GMT

Delcam�s subsidiary in Poland, Delcam Polska, has opened a third office in Bydgoszcz to support further growth in sales of the company�s CADCAM software in the country.

Delcam's Clive Martell named CEO of the Year

Wed, 6 Feb 2013 00:00:00 GMT

Delcam�s Chief Executive, Clive Martell, was named CEO of the Year at the Grant Thornton Quoted Company Awards, sponsored by Growth Company Investor.

Delcam supports all leading EDM equipment with integrated electrode solution

Tue, 5 Feb 2013 00:00:00 GMT

Delcam has extended the range of EDM equipment supported by its integrated solution for the design, machining and inspection of electrodes.

Delcam's Sales Partner Meeting celebrates another record year

Mon, 4 Feb 2013 00:00:00 GMT

More than 280 delegates from Delcam�s international sales network attended the company�s 2013 Sales Partner Meeting held at the St.

Delcam to show robot machining developments at JEC

Thu, 31 Jan 2013 00:00:00 GMT

Delcam will demonstrate the latest developments in its PowerMILL software for the programming of machining by robot at the JEC exhibition to be held in Paris from 12th to 14th March.

Delcam welcomes Canadian High Commissioner to Birmingham

Thu, 24 Jan 2013 00:00:00 GMT

Delcam hosted a visit to its Birmingham headquarters by the Canadian High Commissioner, Gordon Campbell, on 17th January.

Delcam improves PowerSHAPE solid modelling and point cloud tools

Wed, 23 Jan 2013 00:00:00 GMT

Delcam has launched the 2013 R2 version of its PowerSHAPE CAD software family with new tools and enhancements for solid modelling and for manipulating point clouds.

Delcam to show latest in CAD and CAM at AeroDef

Fri, 18 Jan 2013 00:00:00 GMT

Delcam will demonstrate the 2013 releases of its complete CADCAM software for the design, manufacturing and inspection of aerospace and defense parts at SME�S AeroDef Manufacturing Conference, to be held at the Long Beach Convention Center from 19th to 21st March.

Delcam UK achieves record sales of software/maintenance

Mon, 14 Jan 2013 00:00:00 GMT

Further evidence of the growing resurgence in UK manufacturing comes with the news that Delcam�s UK Division last year achieved its highest sales of software and maintenance since the company�s UK business was converted into a separate trading division in 1996.

Delcam partners on new machining method for �fir-tree� profiles

Thu, 10 Jan 2013 00:00:00 GMT

Delcam is working with Iruba, a German provider of engineered solutions, and machine-tool manufacturer Hermle to develop a novel five-axis machining method, programmed with the PowerMILL CAM system, for the creation of "fir-tree� profiles in components for turbo machinery.

Delcam achieves record orders in December

Thu, 3 Jan 2013 00:00:00 GMT

Birmingham-based CADCAM developer Delcam is pleased to announce that, in line with the trading update made on 18 December 2012, it achieved a new one-month record in December 2012 for orders of software licences and maintenance contracts.

Delcam to show 2013 releases of CAM products at Houstex 2013

Wed, 2 Jan 2013 00:00:00 GMT

Delcam will demonstrate the 2013 releases of its PowerMILL, FeatureCAM and PartMaker CAM systems on booth 1234 at Houstex at the George R, Brown Convention Center in Houston, Texas, from 26th to 28th February.

Hankook Delcam wins Award for Excellence in Sustainability Management

Thu, 20 Dec 2012 00:00:00 GMT

Last month, Hankook Delcam, Delcam�s Joint Venture in South Korea, won the award for Excellence in Sustainability Management at the Corporate Sustainability Management Awards held by the South Korean Ministry of Knowledge and Economy and co-sponsored by the country�s Small and Medium Business Administrator.

FoFdation project partners, Artis and Delcam, start machining trials

Tue, 18 Dec 2012 00:00:00 GMT

German FoFdation partner Artis visited Delcam in Birmingham for three days at the end of November to install, and to train staff on using, process monitoring equipment on one of the CNC machines inside Delcam�s Advanced Manufacturing Facility.

SECO to sponsor Delcam's international student CAM competition

Mon, 17 Dec 2012 00:00:00 GMT

Delcam is pleased to announce that cutting-tool supplier, Seco, is to sponsor the company�s first international student CAM competition.

Delcam adds multilingual learning zone for latest PowerINSPECT

Wed, 12 Dec 2012 00:00:00 GMT

Delcam has enhanced its multi-lingual learning zone within the Delcam.

Delcam extends 20-year partnership with Autovaz during Ministerial visit

Mon, 3 Dec 2012 00:00:00 GMT

Delcam has extended its 20-year partnership with Russian automotive manufacturer, AutoVAZ, with an agreement covering support and maintenance for the coming year.

Delcam programs used for turbo milling demonstrations

Fri, 30 Nov 2012 00:00:00 GMT

Delcam�s PowerMILL software for five-axis machining is being used to program a novel machining method for the creation of "fir-tree� profiles in components for turbo machinery.

Delcam's PowerMILL enables five-axis machining at Golden Era

Thu, 29 Nov 2012 00:00:00 GMT

Adding a five-axis DMS CNC router programmed with Delcam�s PowerMILL CAM system for five-axis machining has made it possible for film and events company, Golden Era Productions, to produce sets and props as big as ten feet by five feet by four feet in a single set-up, even when the pieces include complex, highly-detailed 3D surfaces.

Delcam GmbH hosts successful user meetings

Wed, 28 Nov 2012 00:00:00 GMT

Delcam GmbH hosted a series of user meetings in Niedernhausen (near Wiesbaden) between 15th and 17th October.

Delcam forms new subsidiary for Australia and New Zealand

Fri, 23 Nov 2012 00:00:00 GMT

Delcam is pleased to announce that it has converted the software division of its Australian reseller Camplex into a wholly-owned subsidiary, Delcam Australia, covering the sales and support of Delcam software products in Australia.

Free CAD data translation from Delcam

Thu, 22 Nov 2012 00:00:00 GMT

Delcam is offering free use of its online CAD data-exchange service, Delcam Exchange, from 21st to 26th November.

Delcam India to show Vortex high-speed roughing at IMTEX

Tue, 20 Nov 2012 00:00:00 GMT

Delcam India will demonstrate the new Vortex strategy for high-speed area clearance on at the IMTEX 2013 machine-tool exhibition to be held in Bangalore from 24th to 30th January.

Delcam CADCAM used for machining of laser-sintered metal

Fri, 16 Nov 2012 00:00:00 GMT

Additive manufacturing and machining are usually regarded as competing processes.

FoFdation consortium partners gather for progress update

Thu, 15 Nov 2012 00:00:00 GMT

Jan Willem Gunnink, Manager of Research & Development Projects in Europe for Delcam, and four other colleagues from the company joined the consortium partners of the FoFdation project at ECN in Nantes, France, from 16th-19th October 2012 to share results and update everyone on the progress made so far towards achieving the project objectives.

Delcam to show latest in CADCAM for toolmakers in Indonesia

Wed, 14 Nov 2012 00:00:00 GMT

Delcam Indonesia will demonstrate the 2013 releases of Delcam�s PowerSHAPE CAD software, PowerMILL CAM system and PowerINSPECT inspection software at the Manufacturing Indonesia exhibition to be held in Jakarta from 5th to 8th December.

Delcam supports move to larger and more complex parts at dalau

Fri, 9 Nov 2012 00:00:00 GMT

In a move to enable the company to machine larger and more complex plastic parts to high levels of precision, dalau has added a new DMG machine, programmed with Delcam�s FeatureCAM feature-based CAM system, and a Hexagon inspection arm using PowerINSPECT inspection software.

Delcam to show latest in CAD and CAM at Southern Manufacturing

Thu, 8 Nov 2012 00:00:00 GMT

Delcam will demonstrate the 2013 releases of its PowerSHAPE CAD software and PowerMILL CAM system at the Southern Manufacturing exhibition to be held in Farnborough on 13th and 14th February.

Delcam to show design, machining and inspection developments at Autosport

Fri, 2 Nov 2012 00:00:00 GMT

Delcam will demonstrate the latest developments for the motorsport industry in its design, machining and inspection software at the Autosport Engineering exhibition to be held at the NEC, Birmingham, on 10th and 11th January.

Delcam adds new website for PowerSHAPE CAD software

Thu, 1 Nov 2012 00:00:00 GMT

Delcam has launched a new website for its PowerSHAPE CAD system �

FoFdation project progress presented at CIRP Conference

Thu, 26 Jul 2012 00:00:00 GMT

A session on the FoFdation project (Foundation for the Factory of the Future) was included in the 8th CIRP Conference on Intelligent Computation in Manufacturing Engineering held in Ischia, Gulf of Naples, Italy, from 16th to 20th July.

Delcam to show integrated electrode solution at IMTS

Wed, 25 Jul 2012 00:00:00 GMT

Delcam will demonstrate its completely integrated solution for the design, machining and inspection of electrodes on booth E-3222 at the IMTS exhibition to be held in Chicago from 10th to 15th September.

Delcam adds CADCAM veteran for FeatureCAM sales in Michigan

Tue, 24 Jul 2012 00:00:00 GMT

Delcam has strengthened its USA sales team with the appointment of Arthur Schmidt as Sales Manager for the FeatureCAM feature-based CAM system in Michigan and northern Ohio.

Foreign Secretary William Hague visits Delcam at Farnborough Air Show

Fri, 20 Jul 2012 00:00:00 GMT

Foreign Secretary William Hague visited the Delcam booth at the Farnborough Air Show last week as part of a guided tour of the busy show halls.

Delcam rated world's leading CAM software specialist for 12th year

Thu, 19 Jul 2012 00:00:00 GMT

The latest NC Software Market Analysis Report from leading US analysts CIMdata shows that, in 2011, Delcam again had the highest vendor revenues and received the highest end-user payments of all the CAM-centric companies.

Delcam's success in Asia featured by UKTI

Fri, 13 Jul 2012 00:00:00 GMT

Delcam, the Birmingham-based developer of CADCAM software, has been selected by the UK Trade and Investment Asia Task Force to be featured on the "Business in Asia� website as one of a series of case studies on UK companies that are having success in the region.

Delcam ensures Gardner Aerospace is quick off the mark

Thu, 12 Jul 2012 00:00:00 GMT

Speed is of the essence in the fast paced, competitive world of aerospace manufacturing, particularly when it comes to any maintenance or repair work relating to an aircraft being stuck on the ground waiting for an urgent replacement part to be manufactured.

Delcam reseller Les Technologies increases customer support

Thu, 5 Jul 2012 00:00:00 GMT

Delcam�s reseller for the French-speaking part of Canada, Les Technologies, has increased the technical support for its customers with the appointment of Pasqual Desjardins as an additional application engineer.

Delcam's new PowerSHAPE CAD enhances direct modelling and reverse engineering

Wed, 4 Jul 2012 00:00:00 GMT

The 2013 release of Delcam�s PowerSHAPE CAD system includes enhancements to its direct modelling and reverse engineering capabilities that will make the software both more flexible and even easier to use.

Delcam tastes success at Hermle Open House

Fri, 29 Jun 2012 00:00:00 GMT

Delcam continued its close relationship with Hermle at the Open House held recently at the company�s headquarters in Gosheim.

Delcam updates Solid Doctor for CAD data repair

Thu, 28 Jun 2012 00:00:00 GMT

The 2013 release of Delcam�s PowerSHAPE CAD software, which is due for release next month, will include a major upgrade to the Solid Doctor module for data repair.

Delcam celebrates 40 years of CADCAM

Tue, 26 Jun 2012 00:00:00 GMT

Delcam held its latest Technical Sales Partner Meetings in the UK and USA over the last two weeks, with over 150 engineers from the company�s sales network receiving training in the latest releases of its software.